Dimensional Analyzers
MSC SPI Radius Gage, 5/16 Inch, Satin Chrome Finish, Steel
This radius gage is designed for precise measurement of 5/16 inch radii. It features a durable steel construction with a satin chrome finish, and includes both convex and concave radii on each leaf for comprehensive measurement capabilities. It offers high accuracy for reliable measurements.
- Measures 5/16 inch radius
- Constructed from durable steel
- Features a satin chrome finish
- Includes convex and concave radii on each leaf
- Provides an accuracy of ±0.0012 inch
MSC SPI Digital Protractor, 0.10 Resolution/Accuracy, 360/90 deg Range, 1 ea
This digital protractor provides precise angle measurements with a 0.10° resolution and high accuracy. It features a wide measuring range and includes a 3V lithium battery for immediate use.
- Calibrates in minutes without special fixtures
- Provides 0.10° resolution
- Offers accuracy up to 0.1° (level 10°), 0.1° (plumb 10°), and 0.2° (maximum error)
- Features a measuring range of 360° and four 90° quadrants
- Includes a 3V lithium battery
MSC SPI Plug & Pin Gage, Class ZZ Minus, 0.4570 in Diameter, Steel
This SPI Class ZZ Minus Plug & Pin Gage is a precision instrument designed for accurate measurement of internal diameters. Manufactured from steel, it features a diameter of 0.4570 inches and a tight tolerance of 0.000200 inches, making it suitable for demanding quality control and inspection applications.
- Precision ground to 0.4570 in diameter
- Class ZZ Minus tolerance for critical measurements
- Durable steel construction
- Ideal for verifying hole sizes and depths
MSC Starrett Rectangular Gage Block, Steel, .126 in., Grade 0 Accuracy
This rectangular gage block is produced from traditional high-grade steel and is recommended for universal use in shop floor environments.
- High-grade steel construction
- Rockwell "C" hardness of approximately 64-65
- B89.1.9 Grade 0 accuracy
- Suitable for inspection applications
- Nominal size of .126 in.
- Size tolerance of ± 5 μin
- Variation in length tolerance of 4 μin
- Flatness tolerance of 4 μin
- Manufactured in the United States
MSC Vermont Gage Plug Gage, 0.4270 in Diameter, 2.0000 in OAL, Tool Steel
This Class ZZ Plus Plug Gage is crafted from tool steel and offers high precision for various measurement applications. With a diameter of 0.4270 inch and an overall length of 2.0000 inches, it features a tolerance of 0.000200 inch, ensuring accurate gauging.
- For go inspection, setting micrometers, verniers, and other measuring devices
- Includes certificate of accuracy with NIST traceability
MSC Vermont Gage Class ZZ Plus Plug Gage, 0.4560 in Dia, 2.0000 in OAL
This Class ZZ Plus Plug Gage is designed for go inspection and can also be used to set micrometers, verniers, and other measuring devices. Each gage includes a certificate of accuracy with NIST traceability.
- Designed for go inspection
- Can be used to set micrometers, verniers, and other measuring devices
- Includes a certificate of accuracy with NIST traceability
- Made from tool steel
- Coating/finish: 10 micro
- Meets ASME B89.1 standards
- Diameter of measurement: 0.4560 in
- Overall length: 2.0000 in
- Tolerance: 0.000200 in
MSC Fowler Dial Bore Gage, 4-12 in, 0.0005 in Graduation, 5 Anvils
This Dial Bore Gage measures diameters from 4 to 12 inches with a graduation of 0.0005 inches. It includes an indicator, extension holder, and comes with 5 carbide anvils and a wooden storage case, making it suitable for precise bore measurements in various applications.
- Measures diameters from 4 to 12 inches
- Features 0.0005 inch graduation
- Includes indicator
- Includes extension holder
- Comes with wooden storage case
- Equipped with 5 carbide anvils
- Features chrome plated handle
- Includes 2 extensions
MSC Vermont Gage Pin Gage, 0.2350 in, Class ZZ, Go (Plus), Tool Steel
This pin gage is designed for precise measurement of hole sizes. Manufactured from durable tool steel, it features a 0.2350 inch diameter and a 2 inch overall length. It is a Class ZZ, Go (Plus) type gage, providing a tolerance of +.0002/-.0000. Each gage includes a Certificate of Accuracy with NIST Traceability.
- Measures hole sizes within +.0002/-.0000
- Includes certificate of accuracy with NIST traceability
- Made from tool steel with Rc 60/65 hardness
- Finish is steel with 10 microfinish or better
- Class ZZ classification
- Go (plus) type
- 2 in overall length
- 0.2350 in diameter
MSC SPI Depth and Angle Gage, 0 to 6 inch Rule, 30 to 60 degree Angle, Hardened Steel Head
This combination depth and angle gage provides precise measurements for various applications. It offers a rule measurement range from 0 to 6 inches and an angle measurement range of 30 to 60 degrees. The head is made from hardened steel and the rule from stainless steel, ensuring durability and long-lasting performance.
- Hardened steel head with 2-1/2 inch base.
- Stainless steel blade with 32nds and 64ths graduations.
- 60 degree angle graduation for precise angle measurements.
- Measures angles at 30, 45, and 60 degrees on both sides.
- Includes a non-graduated rod for measuring holes under 3/32 inch diameter.
MSC Vermont Gage Plug Gage, No Go Type, 0.1510 in. Diameter, Class X, Tool Steel, 2 in. Long
This Class X No-Go Pin Gage is manufactured from tool steel and designed for precision measurement in both shop floor and metrology laboratory applications. It serves as a master to calibrate measuring equipment or for direct gaging of parts, meeting/exceeding ISO 17025 standards and includes a Certificate of Accuracy with NIST Traceability.
- Diameter of 0.1510 in.
- Overall length of 2 in.
- Class X tolerance.
- Made from tool steel with RC 60/65 hardness.
- Features a 4 microinch or better surface finish, which is also chrome plated.
- Suitable for calibrating measuring equipment or gaging parts directly.
- Meets or exceeds ISO 17025 standards.
- Includes a certificate of accuracy with NIST traceability.
- Dimension type is "
- Diameter increment of 0.0001 in.
MSC SPI Gage Ball, Chrome Steel, 63 HRC, Grade 25, 5/32 Inch
This SPI Gage Ball is crafted from durable Chrome Steel, engineered for precision measurement applications. It features a hardened construction with a 63 HRC hardness, ensuring reliability and longevity. With an Accuracy Grade of 25 and AFBMA certification, this gage ball provides precise and consistent results for various calibration and inspection tasks.
- Constructed from high-quality chrome steel for durability.
- Hardened to 63 HRC for exceptional wear resistance.
- Features an accuracy grade of 25, ensuring high precision.
- AFBMA certified for reliable performance standards.
- Provides a tight tolerance of 0.000100 decimal "
- Ideal for calibration, layout, and machine setup tools.
MSC Vermont Gage Class X Plus Pin Gage, 0.2501 in x 2 in, 4 Micro
This Class X Plus Pin Gage has a diameter of 0.2501 in and a length of 2 in. It features a 4 Micro Coated finish and is constructed from durable tool steel. This gage includes a Certificate of Accuracy with NIST Traceability, making it suitable for the calibration of measuring equipment or for direct part gaging.
- Diameter of 0.2501 in
- Tolerance of 0.00004 in
- Constructed from tool steel
- Features a 4 Micro Coated finish
- Includes certificate of accuracy with NIST traceability
- Ideal for calibration of measuring equipment or direct part gaging
- Made in the United States
- Length of 2 in
MSC SPI Small Hole Gage, Flat Bottom Type, 0.125-0.200 inch, Satin Chrome
This small hole gage, flat bottom type, is designed for precise measurement of shallow holes, slots, and grooves. It features a measurement range of 0.125 to 0.200 inch and a durable satin chrome finish.
- Full radius measuring faces with flat bottom, ideal for measuring shallow holes, slots, and grooves.
- Size adjustment by knurled knob.
- Final size is obtained by measuring over the contact points with a micrometer.
- Gaging surface is fully hardened.
- Satin chrome finish.
- Extra long for gaging deep holes and slots.
MSC Vermont Gage Class ZZ Plus Plug Gage, 0.2325 in Dia, 0.0002 in Tolerance
The Vermont Gage Class ZZ Plus Plug Gage is a precision tool made from durable tool steel, designed for accurate go inspection and for setting micrometers, verniers, and other measuring devices. It features a 0.2325 inch diameter with a tight 0.0002 inch tolerance and a 10 microfinish for reliable measurements. The overall length is 2.0000 inches.
- Includes certificate of accuracy with NIST traceability.
- Meets ASME B89.1 standards.